JN0-331 Dumps

Download latest Juniper JN0-331 dumps.

Download

JN0-100 Dumps

Hello every one I am pleased to share the Juniper JN0-100 dumps , All you guys can download here instantly .Keep in touch with you comments plz.

Download JN0-100

ONT PRE EXAM

This information get from some forums (sadikhov..) , I dont know it correct or not correct, you should thinks by yourseft.

Hi all
I have ONT with 1000/1000. So Glad and now CCNP Certified.
P4S 2.95 still valid, All simlets is been discussed.
Didnt have to go through the new security measures. I did my exam in Syd, Aus.
Good luck all, and big thanks to Sadikhov and all members for great shares.

hi guys, i passed ont today
about 7-8 new questions but they were pretty easy.. nothing to worry about
and most of the questions came from this topic not from p4s .95 :-)
so dont forget to take a look at discussed questions in this topic

Guys I passed with 1000/1000 Yesterday
I apprichiate the effort of all who sharing there experience
all from pass4sure 2.95 except one sim Citrix , SQL Net simlet mentioned before

I pass ONT today with 955 score.4-5 were out of p4s 2.95.
thx to all sakikhov member and sadikhov forever!I like you guy!

New quetions encountered:
An exhibit showing 3 Remote sites B, C, and D connected to a Central Site A via a Frame Relay connection. Links A, B,C and D are T1, 128k, 512k and 768k respectively.

Q1: Refer to the exhibit. Which two points would traffic shaping and traffic policing best be applied?(Choose 2)
A.Central Site – apply traffic shaping inbound so that the central router and servers will not experience congetion.
B.Central Site – apply traffic policing outbound so that the link speed will match the link speed of the remote sites.
C.Remote Site – apply traficc shaping inbound so that the traffic coming from the central site does not cause congestion in the remote network.
D.Remote Site – apply traficc shaping outbound so that the remote links are not oversubscribed.
E.Remote Site – apply traficc shaping outbound so that packets are prioritid and packets that are received in excess are dropped.
Answers: A,D

Q2: Drag the steps required to convert analog to digital signaling on the left to the correct order on the right.
A.Decompression
B.Encoding
C.Quantization
D.Sampling
E.Compression
F.Reconstruction
Answers: Step1=D, Step 2=C, Step 3=B (i.e Sampling, Quantization, and Ecoding)

Q3: Which two characteristics are common between traffic policing and traffic shaping (choose 2).
A.The rate of traffic is measured and compared to a configured policy.
B.Classification is used to differentiate traffic.
C.Traffic is marked and sent out according to priority.
D.Both can be applied to inbound and outbound traffic.
Answers: A, B

Only 3 questions came out from p4s.

Q1 the simlet..... as it mentioned by many of our friends
1.the mission critical trafic in wlan => SQLNET
2.issue on wan2 => wrong polict the correct should be policy 1
3.is ftp being marked correctly => yes ftp is marked correctly based on NBAR
4.the af21 => CITRIX
Q2.there were 4 routers A,B,C,andD connected with frame relay cloud.the question was where to apply inbound and out bound policy(choose two)
answers...
*inbound at remote site
*outboundat central site
Q3.showed a wlc exhibit?(choose three)
answers....
* add new lightweight access point
* locate rouge access point
* show mac address from rouge access point

BCMSN PRE EXAM

This information get from some forums, I dont know it correct or not correct, you should thinks by yourseft.

Hey Every one i passed BCMSN 1000/1000
2 labs from p4s
2 simlet 1 HSRP not in p4s, stp in p4s
2 drag and drop from p4s
2 question out of p4s
First

Which configuration is required on Neighbor HSRP router, in case of event of Failure of interface Fa 1/1 on swich A
The answer is
Option C

Switch_B(config-if)#ip address 10.10.10.1 255.255.255.0
Switch_B(config-if)#standby 1 priority 195
Switch_B(config-if)#standby 1 preempt
Switch_B(config-if)#standby 1 ip 10.10.10.10

Second

one multilayer switch configuration which was connected with 2 access layer switch trunk configured the question is why vlan 100 is not able to ping vlan 200 ,

The anwser was to enable Ip routing
other questions from p4s sure like 13,14,15,17,22,24,26,28,31,33,35,36,38,45,50,58,67,70,75,76,77,85,87,89,93,98,99
,101,102,111,112,117,125,126,127,136,143,144,,149,155,158,161,,164 etc
The Version is used was p4s 2.93

TODAY, i have passed bcmsn test (642-812) with pass-score 988 out 1000
I want tell everyone who intend to have the exam not to worry
Firstly p4s version 2.93 is the last updated and you can make sure from p4s website (286 q.)
Secondly the exam was an exact copy of the p4s and there is no new question i have faced except my first one which was HSRP SIMLET (6 multiple choices given the topolgy and the console access to the switches)
You can find in this forum 5 of 6 question in this forum, the sixth question was:
-for vlan 104: when gi1/0/1 is down on both swithces sw1 will be the active router whereas it was intended that sw2 will be the active one so what is the problem ?!
when u check using show stand by command that the tracking command is enabled with the pre-empt command so when the interface is going down the priority of the sw2 for vlan 104 will be decreased than the one in the
sw1 so the solution is to disable the preemption on sw1.

Hi,
Its very easy just use "show standby" comand
HSRP simlet:
1. For the vlan 102: active vlan is DSW-1, what is the priority of DSW-2? When look at the conf by clicking the DSW-2 icon you can see priority is no explicitly defined at DSW-2 so priority is 100 for vlan2.
2. For the vlan 101: active vlan is DSW01, and gi 1/0/1 goes down at DSW-1 but DSW-1 still active for vlan 101, how can we fix that problem? When look at the configurations DSW-1 priority is 200 for vlan 101, DSW-2's is 190. DSW-1 is tracking gi 1/0/1 interface with decrement value 5. so we should change the decrement value from 5 to 15.
3. For the vlan 103: active vlan is DSW-1, priority is 150 and is tracking gi 1/0/1 interface with decrement value 55. What is the new priority for DSW-1 when gi 1/0/1 is gone? Answer is 95.
4. For the vlan 105: active vlan is DSW-2, when tracking interface gi 1/0/1 at DSW-2 is gone active switch would be DSW-1. But when coming back the interface gi 1/0/1 back DSW-1 is still active sw dor vlan 105, what is the problem? You should enter preemt commant at DSW-2.
5. dsw1 is active for 103 vlan, dsw2 is not active even if all interface are up -- bcos priority on dsw1 is 200 and dsw2 is 190 - so decrease priority on dsw1 switch betw 150 and 190

ISCW EXAM LABS

LAP 1: PPPoE

Config :

P4S-R(config)#int e0/0
P4S-R(config-if)#pppoe enable
P4S-R(config-if)#pppoe-client dial-pool-number 1
P4S-R(config-if)#no sh
P4S-R(config-if)#exit
P4S-R(config)#int dialer1
P4S-R(config-if)#encapsulation ppp
P4S-R(config-if)#ip address negotiated
P4S-R(config-if)#dialer pool 1
P4S-R(config-if)#ip mtu 1492
P4S-R(config-if)#no shut
P4S-R(config-if)#exit
P4S-R(config)#ip route 0.0.0.0 0.0.0.0 dialer1 <---- ip routing is default static to internet provider
P4S-R#copy run start

The test ip address given in the scenario:

P4S-R# ping 172.16.1.1
!!!!! <----- if ping successful, you have completed this lab!

LAP 2: TACACS+

A company in installed new router R1 in their network. As a administrator you need to configure TACACS for the router with following configuration given below.
1. Enable the TACACS server in R1
2. Configure console and Aux for default authentication
3. Cinfigure VTY for TACACS server authentication
4. Configure the Tacacs server ip 10.2.2.2 and share key 123
5. Login to R2 using provided username and password ( username R2, password COL )
6. From R2 login to R1 using SSH and check the R1 TACACS ( username R1, Passwork TAC )

Config :

R1(Config)# aaa new-model
R1(Config)# tacacs-server host 10.2.2.2 key 123 ( IP and Key may change)
R1(Config)# aaa authentication login default local
R1(Config)# aaa authentication login CUSTOM_LIST group tacacs+ ( Only required to allow TACACS )
R1(Config)# line console 0
R1(Config)# login authentication default
R1(Config)# line aux 0
R1(Config)# login authentication default
R1(Config)# line vty 0 4
R1(Config)# login authentication CUSTOM_LIST
R1(Config)# line vty 5 15
R1(Config)# login authentication CUSTOM_LIST
R1(Config)# exit
R1# copy run start

Login to R2 with provided credentials.

R2>username R2
R2>pass : COL
R2# ssh -l 192.168.1.1 ( It should be successful !!!)

LAP 3: VNP site to site GRE with EIGRP

This is question that request you must click into console to check configure and then answer . Cisco has changed a lot questions in this lap. A Lot of people take the exam and anybody like own. So, I cant post answers in here. You should understand well about VPN GRE tunnel, GRE with EIGRP ... Good luck for the exam !!!

ISCW HOTSPOTS

Hotspot 1: IOS Firewall and ACL

Hotspot 2 : Site to site IPSEC VPN

Question & Answer 1

Solution :

Question & Answer 2

Solution :

Question & Answer 3, 4 :

Solution :

ISCW CORRECTED QUESTIONS PASS4SURE

The new question, out of P4S 3.10:

New question 1: BGP

Router B and C have establisted LDP nei session. During troubleshoot, the labels are being distributed in between 2 router B & C. But no label swapping information in LFIP table. What is most likely cause ?

A. Not yet enable CEF on all router.
B. Not yet run IGP between core-routers
C. Create wrong vrf for every customer.
D. LDP Router-id of this router but point LDP router-id of another router.

New question 2: GRE Tunnel

Why the HostA can NOT ping Server1 ???

A. The tunnel number is diffirent on two router
B. Router 1 have configured wrong tunnel source
C. Router 1 have configured wrong tunnel destination
D. Router 2 have configured wrong tunnel source

Corrected Question from P4S

Question 176 ( p4s 3.10)

A is correct. The question 11 is the same, but answer wrong. ACL 100 ( trusted int ), ACL 101 (untrusted int).

Question 270 ( p4s 3.10)

C, E is correct. The same question, but in p4s answer : The IPS enables a dysnamic acccess list is wrong.

Question 287 ( p4s 3.10)

The answer in p4s is wrong. Config GRE tunnel, you should have "tunnel source" command.

Question 261 ( p4s 3.10)

Drag and drop the steps in the process for provisioning a cable modem to connect to a headend on the above to the below in the order defined by the DOCSIS standard.

The answer in P4S is wrong. The item "IP network initialization" should put at the end.